====== Configure Inateck AS501S device ======

===== Scanner setup =====

  * Open the **Scanner** app on the AS501S

{{ :pasted:20261112-194501.png?nolink&320 |Scanner App}}

  * Set **Output mode** to **Broadcast mode**

{{ :pasted:20261112-194721.png?nolink&320 |Output mode}}

{{ :pasted:20261112-194739.png?nolink&320 |Broadcast mode}}

  * Set **Brocast device** to **CUSTOM** (the setting is spelled this way on the device)

{{ :pasted:20261112-194852.png?nolink&320 |Brocast device}}

{{ :pasted:20261112-194905.png?nolink&320 |CUSTOM}}

===== Mobilid setup =====

  * Install Mobilid from the Google Play store, see [[androidclientuserguide|Mobilid Android client]]

  * Connect Mobilid to the demo or your own Dolibarr

  * Open the main menu and tap **Settings**

  * In the Android Terminal barcode readers section, enter:
     * Broadcast name: 'cn.sto.pda.scan.result'
     * Broadcast data key: 'result'

{{ :pasted:20261112-195002.png?nolink&320 |Mobilid settings}}

  * Optionally tick **Disable Camera scan** to avoid opening the camera scanner by accident

  * Exit and restart Mobilid, because the barcode reader is only detected at startup

  * Scan a barcode to check the reading arrives in Mobilid